Search
New

Quad MFT Hinge System

190,95 336,95 

Our Hinge System allows you to attach it to all types of Multifunction Tables with 20mm holes and 96mm centres without having to attach it to an extrusion like the MFT3…

Clear
Compare

Our Hinge System allows you to attach it to all types of Multifunction Tables with 20mm holes and 96mm centres without having to attach it to an extrusion like the MFT3 from Festool or others using a variety of extruded aluminium profiles. (Slight adjustment is required for the MW1000, please leave a note when placing an order)

All that is required to set this up is to have some additional holes, which can be made with our 346-hole jig MK3 and a 4mm Hex Key, to tighten the quad dog bases.

Simple and easy to set up on the Job site, Workshop or Home hobby setup.

Setting the holes for the hinge requires a max of 35mm from the edge and can be set with 32, 48 or 64mm from your first row of holes. This can be achieved with the 346-hole jig MK3.

To offer the best accuracy, the hinge systems will come with a track-specific alignment pin and rail bolts, but additional track sets can also be purchased.

Accuracy adjustment can be made with one of our precision triangles available here.

Features of our Hinge System

  • Universal can be used from left to right or right to left setups
  • No extrusion is required.
  • Precision machined with 6082 Aluminium.
  • Brackets & plates are made with 304 Stainless Steel.
  • Under Rail Support stop for Benchdogs Fence
  • Compatible with most tracks with a T-slot on the underside of the rail.
  • MFT Inaccuracy adjustment


Quad MFT Hinge System will be available in 3 Options.

    1. Quad MFT Hinge System Only.
    2. Quad MFT Hinge System with 346 MK3 Hole Jig.
    3. Quad MFT Hinge System and 346 MK3 Hole Jig in a Tanos T-Loc III Systainer with inserts.


What you will receive

1 x Quad Hinge System
1 x Quad Hinge Support
1 x Alignment Pin (selected by brand)
2 x Rail Bolts (selected by brand)
4 x 20mm Quad Bases
4 x M6 x 25 Countersunk fixings
1 x 4mm Hex Key

Additional Alignment Pins and Rail Bolts can also be purchased.

Please Note: 

• When measuring for a track that works with an MFT table saw, you would need a track of 240mm minimum plus the width of the table.

• The 30mm Guide Bush is not included with the Hinge System.

Downloads:
3D Printed Alignment Block Click Here
Quad MFT Hinge System Instructions Click Here

Brand

, , , , , , , , , , , ,

Jig

Without Jig, With Jig

Systainer

Without Systainer, With Systainer

Reviews

There are no reviews yet.

Be the first to review “Quad MFT Hinge System”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart